LY-4 Lens cutter

CE

Operation procedure:
* Put lens template to template position,clamping it by the right knob.
* Put a lens which has been marked the axis on lens meter and layout blocker into the position of lens and then fix it by the left knob.Waiting for cutting.
* Power on,put down the machine head lightly.Make the lens on the middle position of milling cutter.
* Lift up the machine head after turning a circle.Take off the made lens carefully.Then finishing it by hand Lens Edger is ok.
 
Notice:
* Except lens cutting,please don’t use it in other things.
* Please don’t touch milling cutter when the machine is working,avoid to be hurt.
* When voltage and frequency can’t meet the requirements,please don’t use the machine.You should be sure of situation of power supply.
* Don’t put machine in position with high temperature or direct sunlight.
* If any liquid or material is inside the machine, please turn off the machine immediately, and then pull out the plug.It can be used until checked and repaired by professional people.
* Except original components,please don’t install other accessories.
* Please don’t make machine overload, don’t collide any component of the machine.
* Please pull out the plug if you don’t use the machine for a time.